Tantalum Capacitor

Suntan Tantalum Capacitor News III

Our below TS20 Chip Tantalum Capacitor itemsare hot selling :

• 10uF 16V 20% A Case
• 1uF 35V 20% B case
• 0.47uF 50V 20% C Case
• 47uF 10V 20% C Case
• 47uF 25V 20% D Case
• 100uF 6.3V 20% C Case
• 220uF 6.3V 20%D Case
• 330uF 4V 20% E Case
• 470uF 6.3V 20% C case

These Chip Tantalum Capacitor are with very good performance in different application field.

This November, our company will attend Electronica2008 in Munich, Germany. At this fair, we will strongly recommend our Tantalum Capacitors to visitors and customers from all over the world. Especially TS19 Dipped Tantalum Capacitor and and TS20 Chip Tantalum Capacitor will be our focus.From the sales performance of2008 first half year, the two Tantalum Capacitors bring us very good business and customers' comment to the two series is satisfactory , these bring us more confidence to expand our market for Tantalum Capacitors all over the world, especially in Europe and in America.

Tantalum Capacitor News II

Tantalum Capacitor has strict demand on storage conditions.  The Storing period is 10 years after manufacturing., in principle (excluding solderability).

In order to assure use, tantalum capacitors stored for over two years or processedthrough dipping molten solder prior to using preferably applied rated voltage while inherent resistance of the power supply is not more than 3Ω(For Non-solidtantalum capacitor, connect a protection resistor of 1100Ω max., in series to the capacitor), and withstand aging at 85℃ for 4-8 hours, then make measurement. The lead terminals of non-polar tantalum capacitor are reversed once every onehour and measurement of DC leakage current is also conducted on the two lead terminals respectively.

Store the Tantalum Capacitor in the package not to be exposed to direct sunlight and dust. Store in the environment holding ordinary temperature (-10~+40℃) and ordinary humidity (80%R.H. or under).If left in the atmosphere of high temperature and high humidity for a long time, solderability of the terminals is decreased and performance of the capacitors is lowered.

Suntan Tantalum Capacitor News

Tantalum Capacitor usage is increasing rapidly due to its  far superior performance than Aluminum Electrolytic Capacitors at higher frequencies. Suntan’s TS19 Dipped Tantalum Capacitor, TS20 Chip Tantalum Capacitor and TS20L Low ESR Chip Tantalum Capacitor are made to meet such increasing demand in the market.  Especially our TS19 Dipped type Tantalum Capacitor re very popular in the European and American market because of very competitive price and good quality.   You may contact us to check details with us if interested.

Our TS20 Low ESR Chip Tantalum Capacitor can be used in Radar applications. In a radar system, the first power stage requied to hold up the microwave block must be efficiently filtered from the 28V bus. When looking for the maximum-capacitance/lowest-ESR options for radar, the LOW ESR Chip Tantalum Capacitor could be the best choice  because it has the optimum combination of Capacitorance and  ESR.  You could check our TS20L Chip Tantalum Capacitor spec and advise which items you are interested if you are in the radar system design and production field.

About Tantalum Capacitor

Tantalum Capacitors are used in electronic devices including portable telephones, pagers, personal computers, and automotive electronics.  When selecting between available tantalum Capacitors, there are a number of key specifications to keep in mind when designing in a tantalum Capacitor.  These  include capacitance value, capacitance tolerance, dissipation factor, leakage current, and equivalent series resistance (ESR).  The designer must also consider the board interface requirements.  Tecate tantalum capacitors are available in radial leaded or surface mount configurations.

Capacitance is a measure of the energy storage ability of a tantalum Capacitor, given as C = K A/D, where A is the area of the electrodes, D is their separation, and K is a function of the dielectric between the electrodes. The formula yields a result in farads (F), but a farad is so large that the most commonly used values are expressed in microfarads (µf = 10-6F). 

The dissipation factor (DF) is the ratio between the resistive and the reactive part of the impedance of the tantalum capacitor submitted to a sinusoidal voltage of specified frequency. It is a measure of the losses in the capacitor.  

Leakage current is measured as the current flowing from one conductor to an adjacent conductor through an insulating layer. The leakage current in tantalum Capacitors is measured after 3 minutes at 25°C, through a 1k resistor connected in series with the capacitor, and with rated voltage applied.

Equivalent series resistance (ESR) represents the extent to which the capacitor acts like a resistor when charging and discharging. This functions via a resistive element within the capacitor model, found in both the AC and DC domains.  The lower the ESR the higher the current carrying ability of the tantalum capacitor.

Dipped Tantalum Capacitor

Dipped Tantalum Capacitor Features

Epoxy-coated solid electrolyte tantalum capacitors are encapsulated with flame-retardant yellow epoxy powder, marked with laser. It meets and exceeds the requirements of IEC Specification 384–15-3, IECQ Specification QC300201/US0003 and Technical Specification SJ/T10856-96, used in TV sets, camcorders, computers, program-controlled electronic telephone switching systems, telephones, instruments and meters.

Dipped Tantalum Capacitor Specifications

1. OPERATING TEMPERATURE -55°C to +125°C; >85°C with rated voltage derating.
2. RATED VOLTAGE See tastrongle 1
3. DC LEAKAGE AT 20°C 10 ≤0.01CRVR or 0.5μA (Whichever is greater).
4. DISSIPATION FACTOR AT 20°C Please See Tastrongle 3
5. CAPACITANCE RANGE 0.047μF ~ 680μF
6. CAPACITANCE TOLERANCE ±20%; ±10%; ±5%; (for special order)
7. CASE SIZES AND DIMENSIONS&nstrongsp; Please see Tastrongle 2
8. TEMPERATURE CHARACTERISTICS See Tastrongle 3

Dipped Tantalum Capacitor Images

Tantalum Capacitor

Dipped Tantalum Capacitors Features

Epoxy - coated solid electrolyte tantalum capacitors are encapsulated with flame-retardant yellow epoxy powder, marked with laser. It meets and exceeds the requirements of IEC Specification 384-15-3, IECQ Specification QC300201/US0003 and Technical Specification SJ/T10856-96, used in TV sets, camcorders, computers, program-controlled electronic telephone switching systems, telephones, instruments and meters.

Chip Tantalum Capacitors - SMD Features

1. Molded case available in six case codes
2. Compatible with all popular "High Volume" automatic pick and equipment
3. Optical character recognition qualified

Chip Tantalum Capacitors Low ESR Features

Our TS20L series is LOW ESR Chip Tantalum Capacitors. This type of capacitor is with 6 different sizes ( S case, A case, B Case, C case, D case, E Case ).

1. Operating temperature Range: -55°C~+125°C (>80°C with rated volted darating)
2. Laser-markec Case
3. Capacitance tolerance: +/-20%; +/-10% (for special order)
4. DC leakage at 25°C:1o<=0.01 Cr or 0.5Ma (Whichever is greater)
5. Dimensions rated voltage and nominal capacitance Please see Table 1 & 2 and Figure 1

Tantalum capacitor

Tantalum capacitors are a form of electrolytic capacitor. However, some forms of them are non-polar, containing two capacitors connected in series (negative to negative). In comparison with aluminium electrolytic capacitors, they are for similar capacitance and volume ratings generally more expensive, with lower effective series resistance. They usually have longer life, especially at moderately elevated temperatures. For surface mount devices, they are generally smaller.

Tantalums exploit the tendency of tantalum to form a protective oxide surface layer. They use tantalum powder, pressed into a pellet shape, as one "plate" of the capacitor with the oxide as the dielectric, and an electrolytic solution or conductive solid as the other "plate". Because the dielectric layer can be very thin (thinner than the similar layer in, for instance, an aluminium electrolytic capacitor), a high capacitance can be achieved in a small volume. Because of the size and weight advantages, Tantalum capacitors are useful in portable telephones, pagers, personal computers, and automotive electronics.

Suntan Hot selling : Dipped Tantalum Capacitor

Suntan produce Dipped tantalum capacitor with Hi-quality and competitive price over 30 years . This product with features of high stable performance, lower current leakage and dissipation factor, stable frequency and temperature and long life. It meets and exceeds the requirements of IEC Specification 384 --15 -- 3, IECQ Specification QC300201/US0003 and Technical Specification SJ/T10856--96. Application: TV sets, camcorders, computers, program-controlled electronic telephone, switching systems, telephones, instruments and meters.