Aluminum Electrolytic Capacitors

Radial Aluminum Electrolytic Capacitor

Radial Aluminum Electrolytic Capacitor List

• General & Miniature
• 5mm height, Non-Polarized
• 105°C, 5mm height
• 105°C, 7mm height
• 7mm height, Bi-Polar
• General, Super Miniaturized
• Non-Polar
• 105°C, General
• 105°C, Long Life
• 105°C, Low Impedance
• 105°C, Low Impedance, Long Life
• 125°C, 1000 hours
• Low Leakage Current
• For Speaker Network
• For Horizontal Deflection
• For Photo Flash
• 105°C, 2000 hours, Low Leakage
• For Ballast & Save Lamp - 10000 hours
• For Motor Starting
• For Ballast & Save Lamp - 8000 hours
• 85°C 5mm height
• 85°C 7mm height
• For Ballast & Save Lamp - 5000 hours
• For Ballast & Save Lamp - 3000 hours
• High Temperature

Radial Aluminum Electrolytic Capacitor Pictures

SMD Aluminum Electrolytic Capacitor

SMD Aluminum Electrolytic Capacitor List

• Standard
• Wide Temperature
• Non-Polarized
• Non-Polarized, 105°C
• Low Impedance
• Extra Lower Impedance
• Long Life Assurance
• 5000 hours Load Life
• High Reliability
• Low Leakage
• Super Low Impedance
• Solid capacitors of SMD type, Low ESR - HVC(under develop)
• Polymer Aluminum Electrolytic Capacitors - SMD(under develop)

SMD Aluminum Electrolytic Capacitor Pictures

Aluminum Electrolytic Capacitor - Suntan offer Aluminum Electrolytic Capacitor

Suntan is a Hong Kong based manufacturer of Aluminum Electrolytic Capacitor. Range includes Snap-in type Electrolytic Capacitor, Screw type and LUG type Aluminum Electrolytic Capacitor, Axial & Radial Electrolytic Capacitor and SMD Aluminum Electrolytic Capacitor etc.  Please refer to below product list of Aluminum Electrolytic Capacitor. Or you can visit our website www.capacitors.hk for more product details :

Aluminum Electrolytic Capacitors List

• Axial Aluminum Electrolytic Capacitors
• SMD Aluminum Electrolytic Capacitors
• Radial Aluminum Electrolytic Capacitors
• Snap-in type Aluminum Electrolytic Capacitors
• Screw type Aluminum Electrolytic Capacitors
• lug type Aluminum Electrolytic Capacitors
• Polymer Solid Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors Pictures

Electrochemical type capacitors

Aluminum is used for the electrodes by using a thin oxidization membrane.

Large values of capacitance can be obtained in comparison with the size of the capacitor, because the dielectric used is very thin.

The most important characteristic of electrolytic capacitors is that they have polarity. They have a positive and a negative electrode.[Polarised] This means that it is very important which way round they are connected. If the capacitor is subjected to voltage exceeding its working voltage, or if it is connected with incorrect polarity, it may burst. It is extremely dangerous, because it can quite literally explode. Make absolutely no mistakes, Above about the Electrochemical type capacitors information content.

...

Tantalum electrolytic capacitors

Tantalum electrolytic capacitors are a step up from aluminum capacitors.  They come in a number of types with different advantages, but in general, they have smaller size, lower leakage, lower dissipation factor, lower ESR, more stable capacitance over temperature, and good service life.  Tantalum capacitors aren't made in the monster sizes that aluminum capacitors are, but are available to several hundred µF in common voltage ratings (to about 100 volts) and to several thousand  uF at low voltage (6-10 volts).

Electrolytic Capacitors

"Electrolytic" means any capacitor that requires a conductive layer between the dielectric and one electrode.  In the original electrolytic capacitor, the layer was an actual electrolyte, a conductive salt in a solvent.  Some electrolytic capacitors today don´t actually use an electrolyte, but the word is still commonly used, to the annoyance of some.  Electrolytic capacitors are made by growing a oxide film, the dielectric, on a metal, the anode, by electrochemical means.  The films are very thin with fairly high Ks (roughly 10-25) which make for a lot of capacitance in a small package.  The resulting devices pass current much better in one direction than the other, making a rectifier of a sort.  Because of this, the metals are sometimes called "valve" metals.  The metals presently used are aluminum, tantalum, and niobium, Above about the Electrolytic Capacitors information content.

...

Suntan 2008 focusing on big size Electrolytic Capacitor production

To meet the increasing demand for Big Size Electrolytic Capacitors (Snap-in, Screw, Lug type), our company focus on these products and expand the production line in 2008. And we add some new series such as TS13D CD297 long life snap in Electrolytic Capacitor, TS13D CD13L Extra long life Screw type Electrolytic Capacitor , TS13D CD135X Mini size Screw type Electrolytic Capacitor; TS13D CD137 85'C long life Screw type Electrolytic Capacitor and TS13D CD139 105'C long life Screw type Electrolytic Capacitor so as to make sure to be available for different application, such as: Inverter, Rectifier, Radio equipment etc.

Suntan offer SMD Polymer Aluminum Electrolytic Capacitors

This product is Surface mount type Aluminum Electrolytic Capacitors with features of Low ESR, Long life, Compact size.stable temperature(20~105°C). The rated Voltage Range from 2VDC to 16VDC, capacitance range from 10uF to 270uF.

Suntan new launch of TS13C-HVC-SMD Solid Aluminum Electrolytic Capacitors

In order to fully meet customer's demand, we developed a new type of SMD Aluminum Electrolytic Capacitors in our products line. It is TS13C-HVC SMD Solid Aluminum Electrolytic Capacitors.

Screw type Aluminum Electrolytic Capacitor

Our TS13D CD135 screw type Aluminum Electrolytic Capacitor has wide application.

Features:

• Load life of 2000 hours at 85'C...